2. 표면처리 (전처리)
도료는 도장을 하기 위한 제품에 불과하며 도장 작업에 관계없이 도료의 품질에 따라 도장효과가 좋게 나타나는 것은 아니다. 도장 효과(도막 성능)에 미치는 도료의 기여도는 5%에 불과하며 나머지 95%는 여러 가지 도장에 관계되는 기타 인자 (표면처리도, 도장 환경, 도막 두께,
water is heated by steam in tubes
MED purifies water through the use of heat, to “boil” off and re-capture the pure water over a number of cycles or “effects”, leaving the unwanted solids behind
Each stage essentially reuses the energy from the previous stage.
majority of water must be pumped from its source or directed into pipes or holding tanks
to remove large debris suc
기관의장 설계 편
A. 기장설계의 정의
조선소에서 하는 선박의 기관부(機關部) 관계의 설계와 공작. 기관의장 설계라고 하면 일반적으로 배관설계를 말하는 것인다. 구체적으로 기관배관SYSTEM, 기관배관, 기장철의장, 기장 축타 설계로 구분이 된다.
B. 기장설계 업무
기장설계는 “기관실에 대한 의
Cause of Occurrence
- Large suction head of pump.
- Large friction loss of pump.
- High velocity of impeller of pump.
- Position of pump is higher than fountainhead.
Solution
- Make suction head and friction loss small.
- Make the velocity of impeller small.
- Install the pump lower than fountainhead.
- Use double suction pump.
- Control the water pressure inside tube
사용방법에 따라 조금씩 차이가 난다. 또한 작동 원리에 따른 분류로는 크게 positive displacement 펌프와 entrapment 펌프로 나눌 수 있다.
- positive displacement 펌프 : 기체를 진공 용기 외부로 제거하는 펌프로 로터리 펌프(rotary vane pump), 터보 분자 펌프(turbo-molecular pump) 등 대부분의 기계적인 펌프
Flow around and through fish gills
Jeesoon Choi and Dongyeop Baek
School of Mechanical and Aerospace Engineering, Seoul National University
Abstract. An overall view of the flow over the fish gills is first described by using the active pump system and the passive ram ventilation. The concept of ram ventilation is introduced and its merits of reducing hydrodynamic drags and efficient e
제조사마다 각 분자량대별로 다양한 제품 (단품 혹은 kit)이 있다. EasyCal이나 EasyVial (Polymer Lab Inc)과 같은 편리한 표준시료도 있어서 2~3번의 injection으로 아주 쉽게 calibration plot을 작성할 수 있다. THF/chloroform에는 주로 polystyrene, DMAc/DMF/NMP/HFIP 는 주로 PMMA, water 용매엔 polyethylene glycol이 이용된다.
3. 냉각판의 설계와 해석 결과
Consider a cold plate fabricated from aluminum(k=190W/mK) with regularly spaced rectangular channels through which the water is passed.
Assume the top surface of the cold plate to be insulated. System reliability considerations dictate that the maximum cold plate temperature must not exceed 40℃.
(a) Determine h and calculate the pumping power.
(1) Disease Study
선천성 공장 폐색증(Congenital jejunal atresia)
선천성 장폐색증은 신생아에서 여러 가지 선천성 기형에 의해 생기며 가능한 빨리, 어 떤 경우에서는 태어난지 24시간 이내에 수술적으로 치료하지 않으면 생후 1주일 이내 에 사망할 수 있다.
1. 흉관배액관(Chest Tube)이란?
- Chest Tube란 늑막강에 음압을 회복하고 공기 또는 액체를 제거하기 위해 흉곽의 늑골 사이를 통해 흉강 안으로 삽입한 관
- 밀폐 흉곽 배액 기구와 연결할 수 있으며, 일반적으로 흉부 수술 후와 폐허탈 시 이용
<중 략>
⋇밀봉흉곽배액기구의 종류 (기계적 체계에 따른